Blackmagic design ultrastudio 3g recorder manual

BLACKMAGIC DESIGN ULTRASTUDIO 3G RECORDER MANUAL HOW TO
BLACKMAGIC DESIGN ULTRASTUDIO 3G RECORDER MANUAL UPDATE

Step 3: Configure Blackmagic Converters Setup Once saved all 8 ports on the capture card can be individually used for input.ДЇor detailed instructions on configuring Blackmagic capture cards please visit Installation and Operational Manual. Ports 5,6,7,8 will show None by default and can be changed to its individual SDI port number:Дecklink Quad (5) - Change to SDI 2 Decklink Quad (6) - Change to SDI 4 Decklink Quad (7) - Change to SDI 6 Decklink Quad (8) - Change to SDI 8 Simultaneously click on Save button after every change.Repeat the same process for the remaining ports, i.e., changing the Connector to the individual SDI port number and clicking the Save button.Дecklink Quad (2) - Change to SDI 3 Decklink Quad (3) - Change to SDI 5 Decklink Quad (4) - Change to SDI 7.It should show SDI 1 & SDI 2 by default as shown in the image to the right, change this to SDI 1. Go to Connector Mapping > Connector, under Video tab.( DeckLink Mini Recorder, Duo 2 and Quad 2 are considered as examples to quote these steps). Once configured follow the below mentioned steps depending on the type of capture card used: Click on the hardware image, or the settings icon located below the hardware name.Go to Applications > Sound & Video > Blackmagic Desktop Video Setup.If there are multiple Capture Cards connected, you can cycle through them by clicking the arrow buttons on the sides of the home page and select the appropriate capture card port whose settings you wish to configure. If you are sending a video signal to your input, it will be automatically detected and the format will be displayed under the VIDEO INPUT icon. The 'Desktop Video Setup' home page displays all the connected capture cards. Step 2: Configure Blackmagic Desktop Video Setup

BLACKMAGIC DESIGN ULTRASTUDIO 3G RECORDER MANUAL UPDATE

Update Blackmagic Software, if it is not up-to-date.

Go to Applications > Sound & Video > Blackmagic Firmware Updater.The 'Blackmagic Firmware Updater' enables the users to update the firmware of the connected capture cards. Step 1: Configure Blackmagic Firmware Updater Note: Steps 1 through 4 below are already completed if your system is purchased and shipped by Userful.

BLACKMAGIC DESIGN ULTRASTUDIO 3G RECORDER MANUAL HOW TO

This document walks you through the installation instructions for configuring hardware settings for Blackmagic Capture Cards and how to use them with Userfulв„ў software.

1.7.1 Map Displays to the Blackmagic DeckLink Source.

1.6.1 Mapping: Creating Blackmagic DeckLink Capture Source.

1.6 Step 6: Create Blackmagic DeckLink Capture Source.

1.5 Step 5: Configuring External Devices.

1.4 Step 4: Ensure that Blackmagic capture card ports are correctly configured.

1.3 Step 3: Configure Blackmagic Converters Setup.

1.2.1 Blackmagic DeckLink Mini Recorder.

1.2 Step 2: Configure Blackmagic Desktop Video Setup.

1.1 Step 1: Configure Blackmagic Firmware Updater.

Blackmagic design ultrastudio 3g recorder manual